Welcome to Shanghai Mengsheng Sheng International Trade
Name: High Vacuum Plug Valve
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Description :
This valve is a high vacuum pneumatic plug valve with a reasonable structural design, beautiful appearance, smooth operation, small size, reliable use, good sealing performance, and long service life. It can be widely used in high vacuum equipment. The valve is powered by compressed air to push the piston, and the driving body is pushed (pulled) by the piston rod, moving along the axial direction with the driving body. The driving body is connected to the swing rod valve plate to complete the opening and closing actions of the valve plate. The medium of the valve is air and non corrosive gases.
Characteristic:
1.The shaft seal is made of fluororubber, while other seals are made of fluororubber and designed without lubricants;
2.The valve body is welded internally with stainless steel, resulting in a low leakage rate;
3.The valve body adopts a reinforced rib structure, with small volume, light weight, and beautiful appearance;
4.Adopting a dual guide bearing roller mechanism, the movement is smooth; The valve plate has an integral structure with uniform support.
Basic Specifications:
Scope of application: 1 × 10-5Pa~1.2 × 105Pa
Pressure difference on the plug-in board when opened: ≤ 3 × 10Pa in any direction
Valve body and seat leakage rate: 1.3 × 10-7PaLs-1
First maintenance cycle: 100000 times
Valve body baking temperature: ≤ 200 ºC when opened; ≤ 150 ºC when closed
Installation location: Any
Compressed air: 0.4~0.7MPa
Power supply: AC 220V 50Hz, 6W or DC 24V, 3W
Valve opening or closing time: ≤ 4s
Valve position indication: equipped with an open/close position indication switch (magnetic switch)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Your satisfaction and positive feedback is very significant to us.
Thank you! Have a nice day!
Product Description
